Intumescent foam expansion joints impregnated with a fire proof material providing 1 or 2 hour of fire protection. Size - 1 metre length Depth; 30mm for 1 hour protection 40mm for 2 hours protection Envirograf Product 40
A dry mix to which water is added and then mixed like plaster. When set, the mortar is load bearing. It can be drilled to allow the installation of services. The Fire mortar is used for fire-stopping around building services that pass through floors and can be used in conjunction with intumescent blocks and slabs to provide a durable, structurally secure...
Easy to apply aerosol foam providing over 100 minutes fire protection. A non-inflammable polyurethane foam that expands up to 40 times its original volume on application, ideal for sealing gaps up to 30mm across.
Firetherm Intubatt 3 is a strong, fast-fit flexible fire seal for curtain wall, slab edge and vertical cladding applications. Use - facade and internal movement and slab edge seals up to 600 mm +/- 7.5% movement - Low cost - Simple to install - Fully tested at Exova BM TRADA up to 4 hours integrity - Easy to cut Dimensions, 1200mm x 600mm x100mm
A high density, 50mm thick fire-stop sponge used as temporary or permanent fire barrier providing 2 hours fire protection in computer rooms and clean/sterile areas. Jointing compound is supplied with the slabs. Size - width x length Envirograf Product 5
A high density rock fibre slab with intumescent coating on both sides, Suitable for use as a permanent fire barrier in walls and floors, giving up to 4 hours fire protection. Intumescent jointing compound is supplied with each slab for fixing sections together. Size - 1200mm x 600mm x 60mm Envirograf Product 4