Easy to apply aerosol foam providing over 100 minutes fire protection. A non-inflammable polyurethane foam that expands up to 40 times its original volume on application, ideal for sealing gaps up to 30mm across.
The kit is designed for use in both plasterboard and solid substrate surfaces i.e. brick, block and concrete walls and ceilings. The products become water-resistant once cured. Tested in a plasterboard wall, achieving 96 minutes fire rating. The kit comprises three 310ml tubes of water-based sealant (two tubes of dark grey sealant and one white...
A non-fibrous, lightweight board measuring 1000mm x 1200mm, which is affixed to steel to provide additional fire protection and insulation. Designed for use with structural steelwork and metal ducting. Available in white as standard, but can be faced with decorative laminate at extra cost. Board size - 6mm, 10mm or 13mm thick x 1000mm x 1200mm
SKAMOPRO 250 is used for passive fire protection applications.It is a lightweight calcium silicate board that is classified as non-combustible according to EN 13501-1:2007 + A1:2009, Class A1. Maximum service Temperature is 1,0000C Board size - 25mm thick x 1000mm x 610mm Other thicknesses are available.
Firetherm Intubatt 3 is a strong, fast-fit flexible fire seal for curtain wall, slab edge and vertical cladding applications. Use - facade and internal movement and slab edge seals up to 600 mm +/- 7.5% movement - Low cost - Simple to install - Fully tested at Exova BM TRADA up to 4 hours integrity - Easy to cut Dimensions, 1200mm x 600mm x100mm