Current best sellers

Clear, White and Coloured Intumescent Coating Kit to Upgrade Raised and Fielded Doors

New product

A water-based clear, white or coloured intumescent coating kit for upgrading raised-and-fielded doors to FD30 and FD60 fire door status.

Envirograf Product 103

More details


- +

Product Info

This is a water based intumescent coating system for upgrading doors and panelling to fire door status. Each kit contains 500ml of primer, 1.5 litre of intumescent coating, and 500ml of top coat.

The doors must have a minimum 6mm thick fielded area and 28mm minimum thickness stiles and rails. Materials contained in each kit are enough to cover 6m area (according to the size of the door, enough material to cover three to four sides of single doors).

Only the risk side needs to be coated on room doors and both sides on doors leading onto corridors or at the top of stairs. There is no need to remove any existing paints, varnish, or gold leaf. 

This product can be applied directly over all previous coatings after normal surface washing. Fire tests have been carried out on specific panels and doors. 

Please call for more information if you have any doubts as to the suitability of the door to be upgraded.

Fire Performance

Doors must have a minimum 6mm thick fielded area and 28mm minimum thickness for the stiles and rails.

Tested to BS476 Part 22 (1987), in which doors achieved an integrity in excess of 44 minutes.

5 other products in the same category:


Compare 0