Interior Flooring Topcoat for ES/VFR & HW Paint Systems
A hard wearing semi-gloss top coating for use on wooden floors or stairways. Used in conjunction with the Product 42 HW system for 30/60 minutes fire protection or in conjunction with Product 92 ES/VFR system for Class 0 / Class 1 / SBI requirements.
This interior topcoat offers good flexibility and durability. It will protect interior wood against the adverse effects of moisture and UV damage. This topcoat is also low-odour and will not yellowing.
It can be supplied in clear, white or can be tinted to any translucent colour. It is available in semi-gloss, finish
Preparation and Application.
Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, loose material and surface contamination. Use Holman Paints Cleaner Degreaser and Mould Removal solution products as cleaning agents and for mould removal.
Treat knots and resinous areas on timber floors with a Knotting Lacquer. Use a good quality filler for filling cracks, nail holes, blemishes and for levelling uneven surfaces.
Ensure that existing painted and filled surfaces are thoroughly sanded smooth.
Note: Discoloration of paint, especially noticeable within light colours, may occur over knots and resinous areas present in the wood.
Prime previously painted timber floors with ES/VFR Primer or HWAP Adhesion Primer depending upon the Fire Protection system being applied.
Prime all bare metal and potential rust spots with a good quality Metal Primer.