A door upgrade kit to upgrade a flat panelled door to fire-rated door
Kit comprises;
- Card or Wood Veneer Intumescent material with adhesive
- Intumescent coating and protective topcoat. (choice of finishes and clear/colours)
Envirograf Product 38
About Intumescent Panelled Door Upgrade Kit
The intumescent material is faced with an oak, pine, gaboon ply veneer or white card.
Easy to apply.
The card can be cut with a sharp knife, adhered to the panels with IA water-based adhesive giving 30 or 60 minute protection.
The protective topcoat is available in any solid or semi-transparent colour in a matt, satin or gloss finish.
Please quote colour and sheen level when ordering or call us to discuss your project.
Kit Types
Kit 1:
- Card Faced Intumescent Material 900mm x 1350mm,
- 75ml Stabond Primer,
- 250ml Wood Primer for the Stiles and Rails,
- 2 x 310ml tubes IA Adhesive
- 500ml White Intumescent Coating,
- 500ml White or Coloured Topcoat
Kit 2:
- Oak Veneer Faced Intumescent Material 1200mm x 1200mm,
- 75ml Stabond Primer,
- 250ml Wood Primer / Sealer for the Stiles and Rails,
- 2 x 310ml tubes IA Adhesive,
- 500ml Clear Intumescent Coating,
- 500ml Clear or Tinted Topcoat
Kit 3:
- Pine Veneer Faced Intumescent Material 1200mm x 1200mm,
- 75ml Stabond Primer,
- 250ml Wood Primer / Sealer for the Stiles and Rails,
- 2 x 310ml tubes IA Adhesive,
- 500ml Clear Intumescent Coating,
- 500ml Clear or Tinted Topcoat
Kit 4:
- Gaboon Ply Faced Intumescent Material 1200mm x 1200mm,
- 75ml Stabond Primer,
- 250ml Wood Primer / Sealer for the Stiles and Rails,
- 620ml TCA Adhesive,
- 500ml Clear Intumescent Coating,
- 500ml Clear or Tinted Topcoat
NOTE: Not all doors can be upgraded. Please call for more information if you have any doubts as to the suitability of the door to be upgraded.
Review this Product