Envirograf Stove Silicone tested to 1250°C

About Stove Silicone tested to 1250°C

Envirograf Stove Silicone is a ready to use putty that remains flexible until cured. Ideal for repairs to firebricks, solid fuel ovens, ranges and boilers.

Tested to 1250^o Centigrade

Application Instructions

All surfaces must be clean and dry and free from dirt, dust, grease and other contamination. Light abrasion of  the surfaces to be bonded will improve the adhesion.

Apply the putty from the cartridge, forcing it onto the area to be sealed, then immediately tool it down to ensure good adhesion. Complete tooling within 5-10 minutes.

Application equipment should be cleaned with warm water after use.

It is necessary to fully dry the product before subjecting to temperatures above 100^oC to prevent gassing and likely failure of the seal/bond.

Allow to air dry for 36-48 hours, after which gentle heat can be gradually applied.