A water-based acrylic intumescent thixotropic adhesive, which when set is water resistant.
Also for use with Envirograf plain intumescent material, card faced and veneer faced intumescent material.
Surfaces should be cleaned prior to application to ensure good bond results. If applying to wood, rub down with glass paper, dust off to give a ‘KEY’ for the adhesive.
Apply evenly to both surfaces with a comb applicator and press the surfaces together. Rub down with a small wallpaper roller to make sure it has a good adhesion. Wipe off any excess using a damp sponge.
Check assembly after 20 minutes, in case of movement.
Used to adhere Envirograf Intumescent material onto door panels in fire resistance testing to BS476 Part 22 (1987) on various doors with differing constructions, achieving integrity and insulation up to 68 minutes.
Tested to BS476 Part 21 (1987), achieving 90 minutes integrity.
Also tested in Spain to European Standard EN1363-1 (2000), achieving 2 hours integrity.
A collection of handy product information brochures, painting guides, colour advice, and decorating ideas. Don't Miss Out - We regularly update this page with seasonal, up-to-date information so be sure to come back again!
We are able to supply our primers and topcoats in a vast array of colours. In addition, we are able to provide very accurate equivalent matches to the paint ranges of the well recognized trade professional and retail designer colour collections. If this were not enough, we are also able to scan and provide close matches to materials such as plastic, glass, printed colour and textiles.