£34.61 (incl VAT)
Envirograf SA20 is a new generation of fire rated sealant adhesives and suitable for adhering or sealing substrates such as metal, glass, wood, plastics, polystyrene, fibreglass, tiles, concrete and stone.
All SA20 colours meet BS476 part 6 & 7 (1987). BS/EN 1364-1, 13501-2, 1366-3, 1365-2:2009
Clear - 30 minutes fire integrity.
White & Black - 60 minutes fire integrity (between timber)
White & Black - 70 minutes fire integrity (between block, brick and stone)
Size: 290ml tube
Colour: White, Black or Clear
£10.13 (incl VAT)
About SA20 Sealant Adhesive
A new generation of sealant adhesive with MS Polymer® technology. This unique blended sealant adhesive is suitable for adhering or sealing various common surfaces and substrates. These include metal, glass, wood, plastics, polystyrene, fibreglass, tiles, concrete and also stone.
- Multipurpose sealant adhesive
- High temperature resistance
- Internal and external use
- Low odour and solvent-free
- Water-resistant
- Paintable
- Does not shrink
- Can be applied to wet surfaces
- Resistant to UV, chlorine, mould and general weathering
All SA20 varieties meet BS476 part 6 & 7 (1987).
Clear: 30 minutes fire integrity.
White & Black: 60 minutes fire integrity (between timber)
White & Black: 70 minutes fire integrity (between block, brick and stone)
Application Instructions
Preparation: Surfaces must be clean and degreased before application of sealant for optimum results and durability. Using a knife or sharp blade, trim the applicator nozzle by 1-2mm. Screw the nozzle onto the cartridge head and attach caulking gun. Where required apply masking tape to prevent spread of SA20 to unwanted areas.
Application: Pump caulking gun to release sealant into nozzle. Using a steady pace, apply evenly to surfaces that require sealing or bonding. Wash hands after use.
Review this Product