£60.37 (incl VAT)
A high density rock fibre slab with intumescent coating on both sides, suitable for use as a permanent fire barrier in walls and floors, giving up to 4 hours fire protection.
Intumescent jointing compound is supplied with each slab for fixing sections together.
Tested to BS476 Part 22 (1987), achieving integrity of up to 240 minutes. Also tested at VNE to European Standard EN1363-1 (2000).
Size - 1200mm x 600mm x 60mm protection up to 240 minutes
Size - 1200mm x 600mm x 40mm protection up to 120 minutes
Envirograf Product 4
£36.00 (incl VAT)
About Intumescent Coated Slabs
A high-density rock-fibre slab with intumescent coating on both sides, that can be easily cut with a sharp knife and be painted or decorated.
These slabs are suitable for use as a permanent fire barrier in walls and floors.
For large floor applications a wire mesh should be used to support the slab if over 1m².
Intumescent jointing compound is supplied with each slab for fixing sections together.
The coated slabs are supplied in a very high density 40mm and 60mm thicknesses.
The slabs can be used over door frames, between the frame head and ceiling, to construct fire walls in voids (where there are PVC pipes and cables, use Envirograf pipe wraps) For floor areas, ‘non-load-bearing’ notices are supplied.
Tested to BS476 Part 22 (1987), achieving integrity of 120 minutes and 240 minutes. Also tested at VNE to European Standard EN1363-1 (2000).
Review this Product