For Expert Fire Protection Advice Call: 01793 525241

Click for more products.
No products were found.

For Expert Fire Protection Advice Call: 01793 525241

Click for more products.
No products were found.

Envirograf Q/VFR Fire Retardant Paint for Internal Wood - White or Tinted


Class 0 / Class 1 Fire Retardant Paint for Internal Wood

Apply 2 coats for Class 0 / Class 1 spread of flame protection

Tested to comply with UK & EU Fire Regulations

For use on new & previously coated interior wood

Can be tinted to ANY colour

Envirograf Q/VFR - Product 92

£23.02 (tax excl.)
£23.02 (excl VAT)
£27.62 (incl VAT)
Colour Choice
This product can be tinted to any colour. Please enter your required colour into the box below and click 'Save Colour Choice'.
  • 250 char. max

About Envirograf Q/VFR Fire Retardant Paint for Wood 

Envirograf Product 92

Fire protection doesn't have to compromise your building's appearance...

Envirograf Q/VFR fire retardant paints provide Class 0 / Class 1 protection to interior and exterior woodwork. A protective top-seal is not required for low wear interior use such as timber soffits.

Tested and approved by testing bodies, airport authorities and leading retailers throughout the world, Envirograf Q/VFR is used by the building and construction industry, cabinet makers, shop fitting and display joinery manufacturers for public and private installations. 

It is available in ready-mixed white and clear or can be tinted to any colour from any trade, professional or DIY colour card. 

Q/VFR products are designed to upgrade new and existing wood to comply with both UK and European Fire Regulations. Envirograf Q/VFR fire resistant paint system gives wooden surfaces Class 0 or Class 1 spread of flame protection.

To achieve Class 0 protection, two coats of Q/VFR paint at 10-12m2 per litre must be applied. You can apply Q/VFR coatings just as you would any other paint, using a brush, roller or spray.

Q/VFR products can be applied to all types of interior and exterior wood including; bamboo, hardwood, softwood, veneer, MDF, and melamine boards.

NOTE: ES/VFR primer is needed when coating surfaces which have previous coatings of wax, paint or varnish and when coating any resinous timber such as untreated Oak.

Product Features
Be the first to leave a review of this product.

Review this Product

  • Product Rating:

Be the first to ask a question about this product!

Question about the product

* Required fields
Send Question
Related products
Customers who bought this product also bought